Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the broken crank handle for your Stromberg Carlson landing gear (LG-1, LG-2, LG-3, LG-4, or LG-183708).
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna be taking a look at a replacement crank handle for Stromberg-Carlson landing gear. This replaces the manual crank handle for your tandem landing gear. It is designed for use with Stromberg-Carlson landing gear, but it will also work with most other brands of landing gear, including Atwood and Lippert. It's constructed . Heavy duty steel construction. It's gonna feature nice protective finishing so you don't have to worry about rust or corrosion, and it's got a nice easy grip design. So this end right here is gonna be the end that connects to the landing gear, and then on this end you're gonna have two grip handles.
Both of them are plastic and they swivel, that way you can easily rotate the unit so you can extend or retract your landing gear quickly, and easily, and comfortably. Now when it comes to the overall dimensions, we measured from this end to this end in a straight line measurement and got around 30 inches. The overall width from bottom to top of this area here of the handles was about 10 and a half inches wide. The inner diameter of the metal shaft where it connects to the landing gear is a half inch, and then the diameter of the outer sleeve on the landing gear end is three-quarters of an inch. That's gonna do it for today's look at the replacement crank handle for Stromberg-Carlson landing gear.
Average Customer Rating: 4.9 out of 5 stars (33 Customer Reviews)
Replaces the broken crank handle for your Stromberg Carlson landing gear (LG-1, LG-2, LG-3, LG-4, or LG-183708).Awesome fast service
etrailer is correct that the Stromberb Carlson crack handle will fit and operate the Atwood 3000 power jack. Just be aware, due to the length of the crank handle, most users with a pick-up truck will have to remove their tailgate in order to raise or lower a trail onto a truck mounted hitch. Not the best solution, but an emergency solution if your power jack is dead and you require a hand crank to operate it.
Very pleased with your customer service, also the kind and prompt service to get the right part,, Thank you so much.. keep up the awesome work
Great replacement crank for the Atwood truck camper electric jacks. We were caught without a backup battery for the electric remote. This came in handy when the jacks only went up half way. Perfect fit!
This is exactly as described. I really needed it to be about 1/2 as long to work with my Atwood lift. The fitting works but the handle is too long. Needed to do some adapting.
After much research with local and state dealers, I was unable to find a crank to operate my landing gear or slide out in case of electrical failure. This crank from etrailer.com arrived in a timely manner and fit my application. It engages both landing gear and slide out mechanisms and appears to be just what I needed. Thank you!
You have an awesome company!! We have been searching high and low for this handle replacement as it has been discontinued. We just purchased a 2008 Artic Fox with an Atwood Power Jack and it didn't come with the manual crank. We have looked on all sites trying to find this and came across a chat where you indicated that this model would work for the Atwood. So grateful!!!
Thank you
Product works and it was the best price I could find on the internet.
Joe
4/14/2015
still going strong, no problems with function or durability.
Performs well enough. Fit/finish is good. Long handle allows placement of hand well away from knuckle-busting obstructions.
This is the perfect manual crank for my RV electric hitch lift, just in case the motor fails.
all worked as expected love E-Trailer s ervice
mike
all worked as expected love E-Trailer s ervice
mike
The crank handle was exactly what I needed and arrived in 2 days without paying any extra. Great service and great speed.
very easy to work with > I appreciate the service this day and age we dont get that often anymore.
I received my handle today, and it fits perfectly. It was just as described and fast delivery. I definitely would order again and tell my friends about your website.
When other companies couldn't help me find the right crank part you all succeeded and promptly.
Thank you
the crank we ordered is perfect and just what we hoped for. Very fast shipment and great communications. Will do business with you again.
This the second time I have placed an order with
This product exceeded Our expectations. The service was excellent Our crank was shipped promptly. Thank you
Perfect fit for the job. Super fast shipping. Will definitely return for all of my RV needs.
Exactly what I was looking for,
At a great price
Great product. Just what I was looking for. Thank You.
Works great
was what I was looking for
Quality products at a competitive price !!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ridgerunner8
8/27/2022
I took the crank handle to a local welding shop and had it shortened so that I no longer need to remove the tailgate to use.